noreaster.com
Forum/Inshore Tackle & Techniques/Hand pliers that can cut hooks

Hand pliers that can cut hooks

2,273 views·17 replies·by BoatGuy
BoatGuy
BoatGuynoreaster.com2022#1
Any recommendations?
First MateOriginal Crew780 postsSince 2019
Leprechaun
LeprechaunMODnoreaster.com2022#2
Those little 6.5" Sargent Pliers are supposed to be able to do that. And made in USA. I think they might be the least expensive pair that I would trust with cutting a hook - assuming that it isn't a 10/0 Shark hook, of course.

Also, I think Manley made a very nice pair of similar pliers, but I can't say that I've seen them around in the various shops that I visit, so maybe they've been discontinued?

Anyway, for more money, maybe Donar, Accurate, or Van Staal offer a pair that will cut tempered steel. I cannot say, because I've never actually had a pair from any of those manufacturers in my cheap-skate hands.



post-28604-0-15000700-1440628209.webp
"Luck" is when preparation meets opportunity.
I prefer fishing evolution to fishing extinction.
If ya want to clean up the water, ya gotta get the pigs out of the creek.
CaptainOriginal Crew2,216 postsSince 2018
BoatGuy
BoatGuynoreaster.com2022#3
I "Googled" 6.5" Sargent Pliers . They were $63 to $99.

I found these: https://www.amazon.com/dp/B00AU5V8D...olid=1DIJ1WBG5Q74W&psc=1&ref_=lv_ov_lig_dp_it

But is says
Will these cut heavy treble hooks?
Answer:
"No they will not, I would get a small pair of bolt cutters, or if you’re worried about being hooked and cutting a hook off"

Bolt cutters?
First MateOriginal Crew780 postsSince 2019
captmike28
captmike28FREE2022#4
I agree with Lep about the Sargent's. In my own experience as well, most of the low-end fishing pliers are only good for cutting relatively light gauge hooks. I had a situation a couple of years ago when a customer got a 2x forged hook stuck in an anchor line. Just wanted to cut off the shank as close to the line as possible but my cheapo Bass pro pilers couldn't do the job. However, another passenger had a pair of Van Staal's and they worked like a charm. Problem is most of those tools go for $300-400, pretty pricey in my book.

Trebles are usually pretty heavy gauge so the recommendation on a set of small bolt cutters actually makes sense. I see them available from a low of under $10 at Harbor Freight for a no name brand to $30- 50 and up for a more reputable brand. Still a lot less than the Van Staal, unless you are so inclined.

Personally, I would take a treble down to my local Harbor Freight store and see which is the least expensive tool to get the job done.
CaptainOriginal Crew1,853 postsSince 2018
F
FlukinitFREE2022#5
Was looking through a fishing magazine says the Manley 6.5 ca cut through heavy gauge hooks. $61.99 at Cabelas maybe worth a look.
First MateOriginal Crew255 postsSince 2018
Chinacat
ChinacatFREE2022#6
Interesting topic and one of those things that I bet is overlooked by lots of folks
I keep a full tool box on my boat but I bet none of the cutters I have could cut a hook in an emergency situation.
I for one will be taking Capt Mikes advice and heading up to Harbor Freight or Home Depot in Riverhead with a few sacrificial hooks to test some cutters to find one for the toolbox👍
At least I'm enjoyin' the ride.....
CommodoreOriginal Crew7,065 postsSince 2018
cany
canyCOMMUNITYnoreaster.com2022#7
A good pair of lineman's pliers
General cany, Watching always Watching
CornField
AdmiralOriginal Crew41,121 postsSince 2018
BoatGuy
BoatGuynoreaster.com2022#8
I remember one YouTube video were the captain had a hook in someone's hand. He tied some rope (string or fishing line) around the hook and at a specific angle, pulled it out.

I guess it assumes the barb came through and is not still imbedded. Thankfully I have not had this happen on my fishing trips.
First MateOriginal Crew780 postsSince 2019
BoatGuy
BoatGuynoreaster.com2022#9

Personally I like Manley 6.5"pliers and wear one in a RipOffs belt sheath every trip. It comes in handy in a pinch for everything. I've cut broken levelwind pawls with fish on, loose reel handle nuts, stripped wires, corroded butt connectors and cut hooks etc. Ya its more expensive than the aluminum cheapies I see everywhere but rather drop a Manley overboard than a $300 Van Staal. A squirt of your favorite spray lube occasionally they'll last forever

First MateOriginal Crew780 postsSince 2019
Old Mud
Old MudFREE2022#10
I have a small bolt cutter that will work if i need it. I tried others, even my pair of Klein's like Cany said but no go. This is what i fish with. 10/0 Owner Super Mu Tu. No hand pliers that i know of will touch them. 🙂 This is actual size.

. 51-mvmIbc-L._AC_SL1200_.jpg
Tell your Children every day that you love them
I was so poor growing up, if i were not a boy i would have had Nothing to play with !! :)
All that matters in the end is that we Loved
"Life isn't about waiting for the storm to pass; it's about learning to dance in the rain."
CommodoreOriginal Crew5,182 postsSince 2018
BoatGuy
BoatGuynoreaster.com2022#11

Ya those need a bolt cutter

First MateOriginal Crew780 postsSince 2019
Leprechaun
LeprechaunMODnoreaster.com2022#12
Or a Plasma Cutter
"Luck" is when preparation meets opportunity.
I prefer fishing evolution to fishing extinction.
If ya want to clean up the water, ya gotta get the pigs out of the creek.
CaptainOriginal Crew2,216 postsSince 2018
BoatGuy
BoatGuynoreaster.com2022#13

Jaws of life

First MateOriginal Crew780 postsSince 2019
pequa1
pequa1MODnoreaster.com2022#14
A good pair of lineman's pliers
Funny. I worked at Jones Beach from 69 to 76 and each fall we would put up snow fence, wiring it to stakes we drove in. A pair of linesmans pliers followed me home. While it may take more than one "squeeze", I would think they would snip the relatively small hooks I use on the yak and boat in the bay. Now I gotsta speriment.

12 in. Bolt Cutters I put these on the yak and I'll capsize LOL !
Every day is Saturday.
CommodoreOriginal Crew7,034 postsSince 2018
T
TheDukeFREE2022#15
Manley, Sergeant or similar pliers will be ok for a lighter gauge wire hook. Clamp down with those cutters on something like a 7/0 and the cutters will be ruined.
Deckhand8 postsSince 2020
pequa1
pequa1MODnoreaster.com2022#16
But how many hooks will you impale in oneself?
Every day is Saturday.
CommodoreOriginal Crew7,034 postsSince 2018
WhatKnot
WhatKnotFREE2022#17
Unfortunately it only needs one.😢
Be Safe
CommodoreOriginal Crew12,915 postsSince 2019
BoatGuy
BoatGuynoreaster.com2022#18

All joking aside if you routinely need to cut those hooks out of a fish then you need to have something more substantial than pliers or a cheap bolt cutter. If your worried about hiking yourself, how often does it happen? Personally in 40 years of fishing I’ve hooked myself 3 times and one of them I needed a doctor.

First MateOriginal Crew780 postsSince 2019

Sign in to reply to this thread.

Thread
Hand pliers that can cut hooks
Sign in