noreaster.com
Forum/Inshore Tackle & Techniques/New Braid to Mono leader Knot - the SC - Looks EASY!

New Braid to Mono leader Knot - the SC - Looks EASY!

7,712 views·43 replies·by Leprechaun·First Post·Latest
longcast
longcastFREE2021#21
I can't tie the FG on my boat. No way, not with all the crisscrossing. I just can't keep track of where I'm at in the "weave," what with all the other distractions on the tog grounds. So that's why I'm very interested in finding a stronger knot than the Double-Uni that I can tie aboard the boat - though in fact the past three seasons I've never lost my shock leader while using either the FG or the Bobbin PR.

But it could happen, and so I'm trying to find "that" knot that will be as strong as those two and still be tie-able on my boat. not to mention the clanking thru the guides and occasional hanging in my small-diameter tip-tops. The Double-Uni definitely is not he knot to deal with all that.

But, I think this SC knot might be "the One." That's why I shared it, though I'm beginning to regret doing so. . . 🙄

Oh, btw, I don't use a shock leader for fluke - I tie my braid directly to the top swivel of my B/S rig, with a 12-turn Improved clinch. Never had that fail, either.
Lep, my apology too. No intention to derail, just sharing my experience and how I fish as it relates to knots, rigging, etc.

I'm a simple guy! 🙂
AdmiralOriginal Crew20,417 postsSince 2019
Leprechaun
LeprechaunMODnoreaster.com2021#22
Nah, no worries guys.

P1 - what you are suggesting is a leader that doesn't have to enter the tip top - because using a swivel would preclude that from happening. So you use a relatively short leader. On most tog setups a longer shock/abrasion leader is needed, in case one has to deal with high-rise obstructions. So its not unusual to use a 7 -10' leader. Therefore the use of a strong, very slim knot is needed, hence my explorations for such a knot. One that's both strong and easy to tie.
"Luck" is when preparation meets opportunity.
I prefer fishing evolution to fishing extinction.
If ya want to clean up the water, ya gotta get the pigs out of the creek.
CaptainOriginal Crew2,216 postsSince 2018
movetheboat
When the bite is on and you break off and rush the knot to get back into the water I can guarantee you the big one will hit....and POP! LOL!
CommodoreOriginal Crew12,530 postsSince 2018
longcast
longcastFREE2021#24
Understood, appreciate and will learn as some uses now come to mind!
AdmiralOriginal Crew20,417 postsSince 2019
pequa1
pequa1MODnoreaster.com2021#25
Nah, no worries guys.

P1 - what you are suggesting is a leader that doesn't have to enter the tip top - because using a swivel would preclude that from happening. So you use a relatively short leader. On most tog setups a longer shock/abrasion leader is needed, in case one has to deal with high-rise obstructions. So its not unusual to use a 7 -10' leader. Therefore the use of a strong, very slim knot is needed, hence my explorations for such a knot.
Exactly. On the kayak and on our bay boat, I am rarely in water deeper than 25' and usually in the teens. I only net the obvious "keepers" and try to shake off anything else. On either "vessel" I am so close to the water already that I can get away with a 4' or even a 3' leader. I don't really know if it makes much difference, but I use fluoro for all leaders. I go even shorter at times surfcasting since I don't want the lure dangling 4 feet down and just use those "paper clips" now.
Every day is Saturday.
CommodoreOriginal Crew7,034 postsSince 2018
OVERBORED
OVERBOREDFREE2021#26
Since my eyesight sucks and my knot tying on a boat is "challenged" I've gotten into the habit of bringing spare reels with me. Especially tog fishing. I always bring and extra Newell 229 and Saltiga 15 ready to go. its bailed me out a couple of times!

That said, Im always looking to improve my fishing knowledge and this knot suggestion is going to get the twice over. Thanks!
"Chance only favors the prepared mind" - Pasteur
Captain4,161 postsSince 2021
Tigashrk
TigashrkFREE2021#27
I’m a fg fan. I usually tie new ones before I fish as part of my prep. I have tied so many in the last few years I find it easy. I do a lot of rigging both on my boat and the boat I crew on, so I get a lot of practice.
First MateOriginal Crew689 postsSince 2019
live bait
live baitFREE2021#28
I'll be practicing it while watching the snow fall.
John
CaptainOriginal Crew1,979 postsSince 2018
BoatGuy
BoatGuynoreaster.com2021#29
I'll give it a try. I have been using the Alberto knot.
First MateOriginal Crew780 postsSince 2019
Leprechaun
LeprechaunMODnoreaster.com2021#30
Here's a knot I've used and like for tying on a pitching deck. Its nice with lighter mono/floro leaders, but if you're using 30lb or above leader, it still does the "bump thru the guides thing," which is what I try to avoid. For light lines/leaders though, this one is one of the best. I think its faster than the Double Uni.

"Luck" is when preparation meets opportunity.
I prefer fishing evolution to fishing extinction.
If ya want to clean up the water, ya gotta get the pigs out of the creek.
CaptainOriginal Crew2,216 postsSince 2018
B
B4sunupFREE2021#31
Hey Pete, I love the FG, but when the bites on and I need a quick tie, I'll throw a barrel swivel on with an improved clinch knot in 30 seconds anywhere anytime.
Like you, I'm looking for an easy knot to tie that's as easy as an improved clinch knot. It doesn't exist for this application.
The GT knot is an easier knot to tie than all of these knots, and tests very well. I'm going to give it a try this year.

Artie
DeckhandOriginal Crew5 postsSince 2018
Leprechaun
LeprechaunMODnoreaster.com2021#32
Hiya Artie, good to see you here! Yes, of course a swivel with a couple of improved clinches is easier. For casting. Not for black fishing. I think there's some confusion on this thread regarding the "why," if not the "how." So let me clarify - as I wrote earlier:

" . . . what you are suggesting is a leader that doesn't have to enter the tip top - because using a swivel would preclude that from happening. So you use a relatively short leader. On most tog setups a longer shock/abrasion leader is needed, in case one has to deal with high-rise obstructions. So its not unusual to use a 7 -10' leader. Therefore the use of a strong, very slim knot is needed, hence my explorations for such a knot. One that's both strong and easy to tie."

For a casting with a relatively short leader, I wouldn't bother with learning any of these knots. The swivel is fine. For longer leaders, its not possible to use a swivel, you need a knot that will run through the guides, with a minimum of hanging.

So in my searching, last season I stuck with the PR Bobbin, which had a little bit of a learning curve to properly master. I experienced zero failures with this knot though, which is the goal.

As a result, I never lost a leader, nor did I need to cut one back to the point of having to replace it. If I had, I'da probably used the Double Uni - which I do not care for, first, because when tied with 40lb mono or flouro it clangs through my tiptop and smaller guides, and second, because its the weakest of all the braid/leader knots.

I think "the Plan" for me at least, is to stick with the PR Bobbin when initially setting up my rods in my garage, and if I should have to replace a long tog rod leader whilst on the boat, then the SC will get the nod.

Well, that's the plan anyway.

Hey, does anyone else here use the PR Bobbin? Its a "way cool" knot to tie - once mastered. Super, super strong, too. I got my bobbin from AliExpress, I think it was like $10, shipped. Its a kinda basic model. Shimano offers one that is far better built for like quadruple the price. I didn't want to spend the coin initially, as I wasn't sure I'd "enjoy" tying this knot. I was too conservative, because as it turns out, I LOVE tying this one!

It is actually very easy to use - the secret is in using the proper tension (or tightness) setting for the little spool. Once you "get it," its a snap to do - and the results are truly excellent. I must have hung up 50 times last season - not a single failure of this knot. I call that a win!

IMG_2110.jpg


IMG_2111.jpg



Somewhat less complicated:

"Luck" is when preparation meets opportunity.
I prefer fishing evolution to fishing extinction.
If ya want to clean up the water, ya gotta get the pigs out of the creek.
CaptainOriginal Crew2,216 postsSince 2018
B
B4sunupFREE2021#33
Pete, as you know most of my fishing is done on the beach. I wasn't implying you could use the barrel swivel for black fishing.
I was suggesting the GT knot as an option though. I think it's easier to tie than your preferred knot.
DeckhandOriginal Crew5 postsSince 2018
Leprechaun
LeprechaunMODnoreaster.com2021#34
Yes, I have used the GT - which is really no more than a Uni with a double overhand stop knot. Very easy to tie. Its good, except with today's trend toward smaller and smaller guides on casting rods, it (the GT) is another guide-clanger. Maybe with the relatively large guides still used on surf rods and most spinning rods the GT would be OK.

But try to use it with a 40lb Big Game leader, on a Daiwa Proteus SS casting rod or other very similar rods and you run the risk of either hanging in the tip top's elongated frame, or worse, bending one of the first four "micro" guides. I don't think its outside the realm of possibility that the GT could actually rip a micro guide right out of its thread wrap, if it hangs up on a hard-fighting fish. That would be bad.

This is why the extensive quest for knots that will better flow thru the guides - and the point of this thread. The FG, SC and my new fav, the PR Bobbin all meet the "smooth-flowing" criteria. And naturally, all are more difficult to tie than old-school Double Unis and GTs. Figures . . .
"Luck" is when preparation meets opportunity.
I prefer fishing evolution to fishing extinction.
If ya want to clean up the water, ya gotta get the pigs out of the creek.
CaptainOriginal Crew2,216 postsSince 2018
live bait
live baitFREE2021#35
Been meaning to try & practice the SC knot but I can’t find the braid or the leader material.....John7FDBF6DD-2E2A-402F-AE40-CCDE11B5FB66.webp
CaptainOriginal Crew1,979 postsSince 2018
DarthBaiter
Been using that for awhile now.

They call it a Yucatan Knot...here is a Youtube post from 10 months ago.

First MateOriginal Crew899 postsSince 2019
DarthBaiter
I still prefer the FG knot, it takes abit more effort but I think it has a skinnier profile. ?
First MateOriginal Crew899 postsSince 2019
live bait
live baitFREE2021#38
Been trying the SC knot, just can't seem to get my fingers working for this one. Keep trying.
John
CaptainOriginal Crew1,979 postsSince 2018
Leprechaun
LeprechaunMODnoreaster.com2021#39
Back to the subject of knots. Though I still lean heavily on the FG to add a mono leader to braid, I have been sticking with the PR Bobbin knot this season, with very good results. It actually ties very fast, once you get the proper tension on the bobbin spool, maybe less than 30 seconds, if you have it down correctly. Tying the locking half-hitches is where you spend a bit more time. But once completed, this knot really flies thru the guides, as good as, or even better than the FG.

Here's my latest version. Admittedly its bit too lengthy, but the bobbin was "spinning" cleanly, and so I let it run a bit. This is 20lb J-Braid X8 to 30lb Berkeley Big Game. One thing that I do that they did NOT do in the vid above, is that I add a bunch of half-hitches on my main line AFTER I clip the leader close. This creates a "ramp" that aids in the clipped end of the leader to smoothly enter the tiptop. Also, and this is optional, I like to put a tiny "schmear" of "Knot Sense" UV glue on the half-hitches, to really lock them in.

IMG_3068.jpg

IMG_3069.jpg

Its a slick knot - once learned. Though I haven't actually tried it yet, I think I may even be able to do it on the boat, which is very tough to accomplish with the FG.

Hey, its just one more kinda cool thing to know, and have in your "bag of tricks. . ."

And the chicks dig that. Umm, nah, not really. ?
"Luck" is when preparation meets opportunity.
I prefer fishing evolution to fishing extinction.
If ya want to clean up the water, ya gotta get the pigs out of the creek.
CaptainOriginal Crew2,216 postsSince 2018
Snapprhead27
Here's a knot I've used and like for tying on a pitching deck. Its nice with lighter mono/floro leaders, but if you're using 30lb or above leader, it still does the "bump thru the guides thing," which is what I try to avoid. For light lines/leaders though, this one is one of the best. I think its faster than the Double Uni.

I've used this and I found on Saturday I was bumping guides a lot. So much that I cut back on the length of my leader. I guess this winter would be a good time to practice different knots.
Commodore5,031 postsSince 2020

Sign in to reply to this thread.

Thread
New Braid to Mono leader Knot - the SC - Looks EASY!
Sign in