noreaster.com
Forum/Boats/$$$ if it's not the boat, it's the trailer...

$$$ if it's not the boat, it's the trailer...

3,853 views·35 replies·by DarthBaiter·First Post·Latest
DarthBaiter
Gonna go drop off my raggedy ass 19M prop at Precision Propeller Repair next week to get the dings out and get it balanced.

$$$

I had my 17M balanced from them a few seasons ago and it made the motor a lot more stable, had a little vibration that was completely gone after they worked on it.

Bring Out Another Thousand. ?0109211415.webp
First MateOriginal Crew899 postsSince 2019
WhatKnot
WhatKnotFREE2021#22

Gonna go drop off my raggedy ass 19M prop at [Precision Propeller Repair]('https://www.precision-props.com') next week to get the dings out and get it balanced.

$$$

I had my 17M balanced from them a few seasons ago and it made the motor a lot more stable, had a little vibration that was completely gone after they worked on it.

Bring Out Another Thousand. ?attachment-31028

Aluminum or Stainless?

Be Safe
CommodoreOriginal Crew12,915 postsSince 2019
BoatGuy
BoatGuynoreaster.com2021#23
Wow, you live far. I have used Long Island Propellers in Middle Island. They are a lot closer. Mark is a great guy.

The bottom prop doesn't look too bad. Don't see anything wrong with the top prop.
First MateOriginal Crew780 postsSince 2019
DarthBaiter
Top one is the 17M that was worked on.

The bottom one is all chewed up, kinda hard to see in the pic.
The drive to the Precision Prop is like 40min for me. A nice scenic drive on the Palisades Interstate Parkway.
First MateOriginal Crew899 postsSince 2019
Old Mud
Old MudFREE2021#25
I'm surprised more folks don't take care of their props like that. Balance is everything. 👍
Tell your Children every day that you love them
I was so poor growing up, if i were not a boy i would have had Nothing to play with !! :)
All that matters in the end is that we Loved
"Life isn't about waiting for the storm to pass; it's about learning to dance in the rain."
CommodoreOriginal Crew5,182 postsSince 2018
Roccus7
Roccus7MODnoreaster.com2021#26
I'm surprised more folks don't take care of their props like that. Balance is everything. 👍
I put a tiny cup in mine, which most folks wouldn't even notice, and ran right out to buy another. Since I tend to put my boat "in harm's way", fishing over, and near to ledges, I'm in the aluminum prop, "Rather trash an aluminum prop than trash my drive train because I use a SS prop" school of propeller selection...
Shall I go to heaven or a-fishing? - H. D. Thoreau
Veni. Vidi. Cepi. - with apologies to Gaius Julius Caesar
AdmiralOriginal Crew21,717 postsSince 2018
Leprechaun
LeprechaunMODnoreaster.com2021#27
Though I really do love my boat, occasionally there are "those" times:

154812980_1603974003324028_6952547934046106595_n.webp
"Luck" is when preparation meets opportunity.
I prefer fishing evolution to fishing extinction.
If ya want to clean up the water, ya gotta get the pigs out of the creek.
CaptainOriginal Crew2,216 postsSince 2018
live bait
live baitFREE2021#28
That boat is no light weight, wonder how he got it up & In.
John
CaptainOriginal Crew1,979 postsSince 2018
Roccus7
Roccus7MODnoreaster.com2021#29
Though I really do love my boat, occasionally there are "those" times:

View attachment 31445
ROTFLMAO, idiot didn't remove registration and probably the same for the serial number...
Shall I go to heaven or a-fishing? - H. D. Thoreau
Veni. Vidi. Cepi. - with apologies to Gaius Julius Caesar
AdmiralOriginal Crew21,717 postsSince 2018
BoatGuy
BoatGuynoreaster.com2021#30
I never did much maintenance since 2002. Just stupid and just lucky. In 2020 I replaced the tires that were dry rotted. I got a new rim and 2 new tires. I went with the Goodyear Endurance.

I had neglected the trailer for too long. I had to gave attention to the Lug nuts and studs and
  • The lights just didn't need new bulbs. I got a set of lights and ran new wire
  • the trailer winch strap needed to be replaced.
  • the tongue Jack needed replacement. The tongue flexed, and I noticed the bottom had rotted out. Nothing but rust there. I replaced it with Stainless steel. That was a job. I had to get cobalt bits to make holes for ball coupler.
  • The safety chain had rusted away. That was replaced too.
  • Last, but not least, I needed a new multi-ball receiver.
2021 will see me working even more on the trailer. The suspension is starting to rot. I have purchased the torsion Axle crossmember. But I need to install it. I have been putting off taking the boat off the trailer.

The bow rest assembly guide could use replacement too.

That was the before. Now the after
First MateOriginal Crew780 postsSince 2019
BoatGuy
BoatGuynoreaster.com2021#31
BTW: Still have more to do. Have to purchase another V-Bar assembly. Waxed the outside. It now gets a coat of Collinite.
Then I move to the interior of the boat.

So much work, so little time....
First MateOriginal Crew780 postsSince 2019
C
I think boating fishing should be fun & easy ,,so docking is better for me & having a ten ton boat makes it hard to trailer LOL
custom crafted fishing rods and blanks from United Composites UC AR custom blanks ...CTS & CTS AR custom blanks ..Phenix M1 and UMBX...
CaptainOriginal Crew1,185 postsSince 2019
BoatGuy
BoatGuynoreaster.com2021#33
Boats and Trailers (if applicable) will always need maintenance. Part of the ownership. Yesterday and the day before I wiped down the boat, put my first coat of wax, then the second. Now I have to tackle the inside. Used to be easier when I was younger.
First MateOriginal Crew780 postsSince 2019
F
I've owned a trailer for 5 years now, after having the boat docked for the first 5 years I owned it in NYC. My problem with the trailer (in my case, not sure how applicable it is to others) is that I don't really know what kind of routine maintenance and inspection is needed. I know what I need to do to maintain the boat, and I have a service manual to straighten me out if I'm not 100% clear. I can tear the entire thing down if I need to, with step by step instructions.

The manual included with my Load Rite trailer is pretty basic. I do what they specify, I lubricate the hubs twice a year, I rinse the trailer after every outing, and I check the wiring on a regular basis. I'm sure there are other things I should be checking though, and there's not really a good source of information for it. And if I wanted to outsource it, I'm not even sure who does the maintenance - does the trailer go to a mechanic, or to a marina (I bought the trailer before I moved the boat out to the Island, so returning it to the dealer isn't an option).

One thing I know I don't like is the brake lines being galvanized. I know I'm on borrowed time there, and I should replace them with stainless steel.
MateOriginal Crew85 postsSince 2019
BoatGuy
BoatGuynoreaster.com2021#35
And if I wanted to outsource it, I'm not even sure who does the maintenance - does the trailer go to a mechanic, or to a marina (I bought the trailer before I moved the boat out to the Island, so returning it to the dealer isn't an option).
I found a possible good source for trailer repair. My mechanic will do some of it. But you saw the pics earlier in this post regarded the rusty axle. As I get older, I didn't want to do this. I found a place across the street from my mechanic. The owners name is Neil. I found him very easy to work with and a straight forward, no BS sort of guy. They do it all including building custom trailers from scratch. The axle I purchased was not a direct fit. No worries, he did the necessary modifications and it is actually a stronger mount than from the factory. Trailer was in a 4 PM and Ready at 5:30 PM.
First MateOriginal Crew780 postsSince 2019
DarthBaiter
I noticed that I had left my brake reservoir cap off during a storm and a 💩 load of pine needles got in there along with some water. I drained all the fluid, vacuumed the reservoir out and refilled and bleed the system.
I'm ready to take her to the ramp and get the season started. ?
First MateOriginal Crew899 postsSince 2019

Sign in to reply to this thread.

Thread
$$$ if it's not the boat, it's the trailer...
Sign in