I am thinking next weekend if the weather cooperates.I have to run over to the boat yard for a short haul to get the bottom painted and pull my lowers for waterpumps and gear oil change.
Getting close..
Old to soon Smart to late
You can put lipstik on a pig but in the end its still a pig
My body thinks its 25 my mind thinks my body is an idiot
You can put lipstik on a pig but in the end its still a pig
My body thinks its 25 my mind thinks my body is an idiot
First MateOriginal Crew346 postsSince 2019
Cleaner waxed the hull last night. I was planning on only waxing it, but upon closer inspection I decided to go the extra mile.
I then waxed the hull and topside.
Tonight I will clean the enclosure isinglass and snaps. I'll clean/treat the snaps and zippers too.
I'd do more but my left (non repaired) shoulder is on fire! All that wax on - wax off did me in last night. On the bright side my repaired shoulder and ankle feel great!
Getting closer.... ?
CommodoreOriginal Crew5,665 postsSince 2018
Finally getting started,hit it with the power washer today maybe start on the bottom tomorrow if the rain holds off,really don't Have much to do this year..View attachment 3984View attachment 3985View attachment 3984
nice looking craft.....
"Well, it's alright.
.............even if you're old and gray."
"Well, it's alright.
............you still got something to say."
.............even if you're old and gray."
"Well, it's alright.
............you still got something to say."
AdmiralOriginal Crew20,900 postsSince 2018
C
Thanks,it's an oldybut a goody,1985 Mako 254 the engine is a 2000 yamy 250,best boat I've ever owned rides like a dream..
Hi Macks..last year i bought a 82 23mako with a F225 yami..used it only on the north shore..this year Im putting it local on the south shore ...so far Im lovin it best ride in that class i even been on,,,soft dry ride..any thing I may need to know about the boat...
custom crafted fishing rods and blanks from United Composites UC AR custom blanks ...CTS & CTS AR custom blanks ..Phenix M1 and UMBX...
CaptainOriginal Crew1,185 postsSince 2019
C
Big boat in the water & ready to go..just have to change the fuel filters and had both wheels redone ..so a test ride ....Cod fishing next weather window...
custom crafted fishing rods and blanks from United Composites UC AR custom blanks ...CTS & CTS AR custom blanks ..Phenix M1 and UMBX...
CaptainOriginal Crew1,185 postsSince 2019
M
Hi Macks..last year i bought a 82 23mako with a F225 yami..used it only on the north shore..this year Im putting it local on the south shore ...so far Im lovin it best ride in that class i even been on,,,soft dry ride..any thing I may need to know about the boat...
First MateOriginal Crew641 postsSince 2019
All done! Boat is clean as a whistle inside and out. ?After the cleaner wax I did two coats of wax. Never did that before, worth the effort! My little 'oopsie' was fixed; like it never happened! I cleaned up my work area and then organized my fishing tackle then stored it in the cabin.
The only things left to do is take her home, run the engine, and clean the deck.
I was thinking of splashing tomorrow, but there are other things I need to do. I plan on thatching my lawn and seeding. I've already finished mulching six yards worth, and leaving some low spots in the yard. I also have poker at 6PM 🙄
When I splash I will use it several times a week for the foreseeable future, so waiting another few days/week won't hurt. I know I'm ready!!🙂
The only things left to do is take her home, run the engine, and clean the deck.
I was thinking of splashing tomorrow, but there are other things I need to do. I plan on thatching my lawn and seeding. I've already finished mulching six yards worth, and leaving some low spots in the yard. I also have poker at 6PM 🙄
When I splash I will use it several times a week for the foreseeable future, so waiting another few days/week won't hurt. I know I'm ready!!🙂
First MateOriginal Crew255 postsSince 2018
All done! Boat is clean as a whistle inside and out. ?After the cleaner wax I did two coats of wax. Never did that before, worth the effort! My little 'oopsie' was fixed; like it never happened! I cleaned up my work area and then organized my fishing tackle then stored it in the cabin.
The only things left to do is take her home, run the engine, and clean the deck.
I was thinking of splashing tomorrow, but there are other things I need to do. I plan on thatching my lawn and seeding. I've already finished mulching six yards worth, and leaving some low spots in the yard. I also have poker at 6PM 🙄
When I splash I will use it several times a week for the foreseeable future, so waiting another few days/week won't hurt. I know I'm ready!!🙂
nice (and clean) looking craft....
"Well, it's alright.
.............even if you're old and gray."
"Well, it's alright.
............you still got something to say."
.............even if you're old and gray."
"Well, it's alright.
............you still got something to say."
AdmiralOriginal Crew20,900 postsSince 2018
Step forward for you, 2" of snow back step here. At least my dock repairs are done, but too cold to paint the bottom and with melting snow/freezing at night, I'm in no rush to pull the shrinkwrap quite yet...
Shall I go to heaven or a-fishing? - H. D. Thoreau
Veni. Vidi. Cepi. - with apologies to Gaius Julius Caesar
Veni. Vidi. Cepi. - with apologies to Gaius Julius Caesar
AdmiralOriginal Crew21,717 postsSince 2018
Sign in to reply to this thread.
Thread
Getting close..

