Had to work through some setbacks but floating now!
Been super-busy with work and all sorts of boat-related issues. Turns out that after I completely finished buttoning up the engine work and tried to start her, yeah, HOLY CRAP!, gas shooting 18" straight up out of the carburetor. And as soon as I got off the key a small carb fire erupted, which luckily I had taken off my sweatshirt and used that to snuff it out. It never ends.
Only one way that an engine behaves this way - she was spinning in the wrong direction, and so became a gas pump instead of a gas vacuum. Let me explain - boat engines are available in two rotations, left-hand and right hand - or to put it another way, clockwise and counter-clockwise. This is because twin inboard installations (and I guess outboards too) use a pair of engines with opposite rotations, so to cancel out prop steer from the two engines turning in the same direction.
I have what is called a "standard rotation" engine, meaning when you view the pulleys at the front of the engine when running they turn clockwise, a.k.a., left-handed. they sent me a right-handed starter, but it arrived in a left-handed box. After my blood pressure calmed down I confirmed this was the case by tapping the key and seeing the pulleys move CCW. Oh, for the love of . . . The idiots (who shall remain nameless) sent me the right starter BOX, with the wrong starter in it.
I'm so effing DONE with the incompetence in just about about everything I deal with - work or "play," always an issue. Two and a half days of hard work down the drain. I had to burn two days of valuable vacation time to re-jack up the motor, to remove the starboard side manifold/riser combination, dump the fresh antifreeze (I was able to save most of it), remove the heat exchanger (a nasty job, btw), and swap out the starter for the correct one. Then reinstalled all the above. Two + days I'll never get back. She runs fine now, so at least there's that.
View attachment 116318
God, I'll never get tired of listening to a big gas V-8's rumble.
Anyway, once that all got done (for the second time), I was able to pull the shrink and get going on the "normal" Spring commissioning work.
View attachment 116314
Here she sits this morning, boat stands removed, with Chris HippyChic Hauling on the way to get her off my lawn and over to the Freeport ramp.
And an uneventful shake-down run to my slip at Yachtsmen's Cove marina. Tomorrow I do a bit more cleaning and then the hunt for Mr. Mat begins thereafter.
View attachment 116319
Oh and LET'S GO KNICKS! My "other" favorite team!
Post your 2019-2025 Fluke Pix & Trip Reports Here!
I would be real careful using stainless steel for manifold bolts due to thermal stress and expansion. They don't stay tight, they are soft and don't have the tensile strength of a good grade 5 or better steel bolt. If they gall, you're screwed instead of the bolt as they snap off in the head. If you use an anti-seize, they loosen from excess thermal expansion. There's a reason manufacturers use steel.
I prefer fishing evolution to fishing extinction.
If ya want to clean up the water, ya gotta get the pigs out of the creek.
Had to work through some setbacks but floating now!
Been super-busy with work and all sorts of boat-related issues. Turns out that after I completely finished buttoning up the engine work and tried to start her, yeah, HOLY CRAP!, gas shooting 18" straight up out of the carburetor. And as soon as I got off the key a small carb fire erupted, which luckily I had taken off my sweatshirt and used that to snuff it out. It never ends.
Only one way that an engine behaves this way - she was spinning in the wrong direction, and so became a gas pump instead of a gas vacuum. Let me explain - boat engines are available in two rotations, left-hand and right hand - or to put it another way, clockwise and counter-clockwise. This is because twin inboard installations (and I guess outboards too) use a pair of engines with opposite rotations, so to cancel out prop steer from the two engines turning in the same direction.
I have what is called a "standard rotation" engine, meaning when you view the pulleys at the front of the engine when running they turn clockwise, a.k.a., left-handed. they sent me a right-handed starter, but it arrived in a left-handed box. After my blood pressure calmed down I confirmed this was the case by tapping the key and seeing the pulleys move CCW. Oh, for the love of . . . The idiots (who shall remain nameless) sent me the right starter BOX, with the wrong starter in it.
I'm so effing DONE with the incompetence in just about about everything I deal with - work or "play," always an issue. Two and a half days of hard work down the drain. I had to burn two days of valuable vacation time to re-jack up the motor, re-remove the starboard side manifold/riser combination, dump the fresh antifreeze (I was able to save most of it), take out the heat exchanger (a nasty job btw, because the four hoses' clamps are VERY difficult to access), and swap out the starter for the correct one. Then reinstalled all the above. Two + days I'll never get back. She runs fine now, so at least there's that.
View attachment 116318
God, I'll never get tired of listening to a big gas V-8's rumble.
Anyway, once that all got done (for the second time), I was able to pull the shrink and get going on the "normal" Spring commissioning work.
View attachment 116314
Here she sits this morning, boat stands removed, with Chris HippyChic Hauling on the way to get her off my lawn and over to the Freeport ramp.
And an uneventful shake-down run to my slip at Yachtsmen's Cove marina. Tomorrow I do a bit more cleaning and then the hunt for Mr. Mat begins thereafter.
View attachment 116319
Oh and LET'S GO KNICKS! My "other" favorite team!
All the blood, sweat and tears are forgotten when a DD hits the deck!
I kinda see it the other way
Having a nice fish hitting the deck makes all the blood sweat and tears even more worth it and satisfying😎😎
Took her off the dock today - first trip of the season
After a TON of wrench-turning, with various twists and turns in this Spring's protracted mechanical work, none of which were my fault, I had to take her for a long run to ensure everything was copacetic. Knowing it was too early for a true deep adventure, I ran out there anyway on a gorgeous ocean. Other than the really worrisome smell of the factory's paint burning off the new exhaust manifold runners, she ran like a charm. Zero issues with the work. I employ a pretty good mechanic, so this is nothing less than I expected. 8-)
But of course every silver lining has a dark cloud and so was the case yesterday. Went to use my two year old $400 Groco washdown pump, and of course, no good. After checking the wires, breaker and switch, played with it for a bit (including rapping the motor with a dead blow mallet), had to give up after seeing smoke coming out of the electrical motor. I always buy the best I can afford, and these American-made Grocos are supposed to be that. Yeah, well not this particular one. So now I get to go to the boat this morning to pull it out of the engine hold - already have another on order. It truly never ends.
As far as the fishing goes, only one fluke - a lone fat and sassy 12-incher that took a piece of cuttlefish on the ling rig. Culled a half dozen fat ding-a-lings for toaster-oven oreganata and that was that.
Pulled off the grounds early as my son's family was coming over for a Mexican feast that my wife was prepping - and to watch my NEW YORK KNICKS finally give me the championship that I've waited 53 years to see. Thousands of hours watching at least 80% of the games since then (100% over the past 4 seasons), and now I can pass on happy that I've seen at least one of my two teams win a title while I'm still breathing. I was a senior in High School last time they did it and now I'm in my 71st year. If that isn't dedication to a team, I don't know what is. Just so happy right now!
My son already purchased a signed lithograph of the now-famous OG put-back that sealed Game 4, (400 escaroles and have to wait 3 months for it) and I think he's gonna gift it to me. He's a good kid - and already knows more about the Knicks than I do. Anyways, geez, what a night! 😁
Look at this little 12" bit of rompin' stompin' fluke fury. Hopefully I get to see its grandfather (or grand mother, I'm not fish-sexist) later this Season.
I prefer fishing evolution to fishing extinction.
If ya want to clean up the water, ya gotta get the pigs out of the creek.
Glad to see you finally pushed off. Sorry about the wash down, but beautiful weather yesterday hopefully made up for it
Its Ling Oreganata Time!
With air-fryer blistered Shishito peppers and sauteed garlic spin-oooch. A nice rose Zinfandel
completed the meal. People that consider these junk fish are just flat missing out on some really good eating.
I prefer fishing evolution to fishing extinction.
If ya want to clean up the water, ya gotta get the pigs out of the creek.
Ling is delicious! Just don't expect to freeze it and have the same out come as fresh!!
Had my friend Sal join me on my day off in an attempt to make a triple play of Stripers, Sea Bass, and Fluke. Early morning “pea soup” made the trip east into the Sound a very slow go.
Had planned to stay local at the Gut so I could test some nearby Sea Bass drops but after 90 minutes with no Bass to show forced a change in plans. Fog started to lift just a bit so we pushed further east to the Race and found better action for the last 2 hours of the flood. Decked 4 Bass and dropped anther 2 although the ones we caught today were either under or over slot. So, no Bass for the box.
Now, having missed the slack water period I had planned to devote to Sea Bass we instead headed back into the bay to try for the elusive Fluke. While the action was not great we did manage to cull 2 decent keepers out of 7 other shorts along with a pair of Weakfish as a bonus.
With almost no breeze inside it was pretty darn hot this afternoon. I can’t imagine what it’s going to feel like later this week when the real heat wave arrives. If nothing else, I hope it “heats up” the Fluke fishing!
There you go!! Glad to see some fluke showing up in the bay for you. I hear Montauk may be starting to heat up with fluke and BSB has been tough throughout the Island.
Last weekend sailed with Capt. Mike (my boat), went deep, caught zero keepers, finished with 20 Ling. Love those things. Very few and far between biscuits, no keeps there either. Maybe a dozen short flatties. Fish came up feeling like they were packed in ice.
Yesterday, return trip with the infamous Freddy/Capt.XXX, similar results - no keeper fluke (maybe a dozen shorties), 25 ling and a pair of 16-18" biscuit keeper biscuits out of 75+ caught. Water temp must be up a bit because the grounds are completely covered with shortie biscuits, though many (at least 20) were in the 15" class. Too bad we ain't Jersey, because then this would have been a very different report. What a friggin' joke these Regs are.
Hopefully the better flat ones start to show, as I think things are gonna pop with a few more degree of increase water temp.
Boat since launching has had a few relatively minor issues I had to work thru, though nothing money and a bunch of sweat equity couldn't handle. "Boat love" is a very strange thing. Sometimes great, sometimes not so much so.
Freddy loves his shorts! Pants, I mean.
I prefer fishing evolution to fishing extinction.
If ya want to clean up the water, ya gotta get the pigs out of the creek.
Yeah, I said the same thing. He told me there’s a guy on eBay that is selling them. I think Freddy told me that the dude actually makes them to order.
I prefer fishing evolution to fishing extinction.
If ya want to clean up the water, ya gotta get the pigs out of the creek.
I was not sure what the day would look like but once the wife woke she had some stuff she wanted to take care of at home so I went down to the boat for a quick outing. Started slow but the bite went savage so actually put one rod down and concentrated on finding a better fish. Duration was short but put a 24 and 19 inch fish on the ice out of 30 fish landed. Wanted to stay for the turn but my daughter was coming over for dinner so no go today. Not sure what tomorrow brings.
Sign in to reply to this thread.